Previous Page  2 / 2
Information
Show Menu
Previous Page 2 / 2
Page Background

Cargo Floor B.V.

Byte 14

7741 MK COEVORDEN

The Netherlands

Telephone +31 524 593 900

www.cargofloor.com info@cargofloor.com

WORLDWIDE

SERVICE NETWORK

The information in this brochure is for information purposes only, no rights can be derived from this information. Copyright September 2016.

2

CSC ‘Cargo Slat Connector’

This very simple solution makes it possible to connect two or more Cargo Floor aluminum floor profiles to

each other to create one longer floor profile. This can be done with almost all variations of floor profile lengths.

For example: you need 14.800 mm overall length

You can connect a 8.000 mm and a 6.800 mm floor profile

Or you connect two equal floor profiles of 7.400 mm and 7.400 mm

For example: you need 13.300 mm overall length

You can connect a 10.000 mm and a 3.300 mm floor profile

Or you connect two equal floor profiles of 6.650 mm and 6.650 mm

Floor repair savings

With a Cargo Floor moving floor the product is always unloaded (slides/flows) over the rear part of the trailer floor. It

will therefore be obvious that most of the wear of the floor profiles will take place there. At the front of the trailer floor

wear will be hardly visible. With this Cargo Floor connecting solution, the possibility now exists to only replace a part of

the floor (for example only the rear end). You will save on the costs because you don’t need a full-length floor and the

transportation cost will be less because you don’t need the full trailer space.

Advantages

Cost saving

No welding required

No special bearings required

Simple to apply

Transport of floor profiles overseas in a

20ft or 40ft sea container

At any spot of the floor profiles connecting possible.

Seal goes fully through the profile, no point of leakage.

Repair advantage

CSC ‘Cargo Slat Connector’

strips: part no. 5150022.1 (set)

CSC ‘Cargo Slat Connector’

drilling jig: part no. 9111015

FEM

(finite element method) +

3-D design

Cargo Floor has inhouse engineering for FEM calculations and

3-D designing. Drawings in all computer extensions available.

ISO 9001