The bearing for the Cargo Floor moving floor transport system

The aluminium floor profiles that are available for the Cargo Floor moving floor transport system are being supported by hardwearing plastic bearings.

 

Twister, for mounting on the 25x25 under-floor beam

The patented TWISTER can be fitted easily and rapidly to the 25x25 under-floor beam (supplied by the trailer builder); no tools are required. By virtue of its ingenious construction the full weight on the aluminium floor section is supported by the thickest internal region of the section. Fouling does not exert an influence on the useful life of the aluminium – and, moreover, the design provides for the maximum stability when subjected to heavy loads (sliding surface 8700 mm2/unit). 

Article number: 4107002
Cargo Floor moving floor bearing: Twister
Cargo Floor moving floor bearing: twister

 Cargo Floor moving floor: bearing twister with aluminium floor profile

 

Cargo Floor moving floor: how to mount a twister bearing
How to mount

 

Bearing 25x25 mm

This bearing needs to be mounted over the 25x25 under-floor beam by using a simple tool and has the same characteristics as the Twister but has four vertical legs. This is the old model bearing from before the Twister and is exchangeable with the Twister, which can be mounted without tools.

Article number: 4107001

Cargo Floor moving floor bearing 25x25

 

Kick Twister

With the Kick Twister, floor profiles can be installed from above (without sliding). This is extremely useful in practice, in case of limited installation areas.

Artikelnummer: 4107005
Cargo Floor moving floor bearing Kick Twister
 Cargo Floor moving floor bearing Kick Twister Cargo Floor moving floor bearing Kick Twister Cargo Floor moving floor bearing Kick Twister

 

Plastic guide strips

Plastic guide strips (patent pending) can be mounted directly to a cross member; available in a variety of models, and can be secured by screws or rivets. The saddle shape of the guide strip accommodates the linear forces imposed on the construction, thereby preventing the strip from becoming dislodged from the cross beam.

Cargo Floor moving floor bearing
 

 

Article number: 4103009    
Cargo Floor moving floor: guide strip    
Orange plastic guide strip    
height 35 mm, 7 “saddles” for profile width 112 mm.    

 

Article number: 4103010
Cargo Floor moving floor  guide strip
White plastic guide strip

height 32 mm, 7 “saddles” 

for profile width 112 mm

 

Anti Lifting Block

The Anti Lifting Block has been designed to give an extra safety against the rising of the profiles by the product or the fork lift truck. The standard bearings already have these function. Can be placed after the floor has already been mounted.

  Article number: 4107006
 Cargo Floor moving floor: Anti Lifting Block  Cargo Floor moving floor: Anti Lifting Block

Support plate

The Support Plate has been designed to give extra stability to the floor when for example high impact forces can be expected from the product. The forces will be carried via the floor profiles directly to the cross members of the under-construction. The support plate can be mounted over the cross members with a maximum width of 60 mm without any fixation and no tools are needed for mounting.

Article number: 4107004
Cargo Floor moving floor: support plates